Smoke Detector Faulty and Solutions

Update time : 2022-08-11 16:38:02

A smoke detector is a fire detection device that sends a fire signal to the panel when detecting the smoke from a fire. It can be applied in companies, houses, shops, warehouses and so on.

When a smoke detector reports faulty, what are the possible problems and what are the solutions?

1.The bus input voltage of the smoke detector is not within the range required.
Solution: Check the bus input voltage of the smoke detector and make sure that the voltage is within the range required by the smoke detector.

2.The communication of the smoke detector with a fixed address fails, or the smoke detector can be logged in, but its communication is unstable
Solution: The smoke detector may be damaged. It is suggestible to replace a new one

3.If the bus of the smoke detector is unstable, it might be the following reasons:

The communication wires are disturbed by electromagnetic fields

Solution: Choose the installation location of the smoke detector correctly, and do the wiring reasonably

Some of the smoke detectors are damaged

Solution: Check the login results of the smoke detectors to find out the faulty rules and devices

Poor insulation of communication wires

Solution: Check the smoke detector with an insulation resistance meter. Add a moisture-proof rubber pad to the junction box or cover box of the smoke detector

4.The smoke detector has a poor connection
Solution:

Check the wiring of the base terminal
Check whether the sheet metal between the base and the smoke detector is in poor contact

5.The smoke detectors have repeated codes or their address codes are repeated
Solution: Check the repeated codes and the smoke detectors that are not logged in

Previous : Indoor Fire Hydrant System Maintenance

Next : What is FM200 (HFC227ea ) fire suppression system ?

What is Fire Hose?

Oct .13.2023

A fire hose is a highly pressurized hose that is used to bring water to the fire. It may also transport flame retardants. Fire hoses can be attached to either a fire engine or a fire hydrant, and the pressure is between 800 and 2000 kPa. For reasons of fire safety, it's quite important to have a fire hose inspection as well as all fire protection equipment tested. If, during a fire emergency, the fire hose fails it could have disastrous results.

Addressable Explosion-proof Fire Alarm System Introduction

Aug .08.2023

The Explosion Proof range of products has been designed to provide protection against explosions and products to ensure that all major advantages of high-quality fire detection technology can be safely exploited in industrial and hazardous environments. Many difficult sites such as metal, paint, pipelines, chemical, pharmaceutical, oil refineries, and other installations are vulnerable to the risk of explosion. In order to protect the assets and people, they need special solutions for fast and reliable fire detection.

Emergency Lighting System Installation Guide

Jul .20.2023

Emergency lighting system is divided into centralized controlling and non-centralized controlling type, or centralized power supply and non-centralized power supply type. This article talks about emergency lighting system, power supply, emergency light controller installation guide.

Fire Alarm System Device Inspection and Maintenance

Jul .05.2023

Installing fire protection facilities and carry out regular maintenance are significant. This article talks about the inspection and maintenance of linear beam smoke detector, aspirating smoke detector, flame detector, manual call point, and strobe sounder.

China-R&D and Supply Chain Center

Huoju District, Zhongshan City, Guangdong Province, China

Email us

[email protected]

Call us

0086 13922805301

About Us: About Us

Products: Fire Alarm System Emergency system Fire Suppression System Fire Fighting System

Contact Us

News: Company News Industry News Fire Alarm Devices Fire Alarm System Fire Detection Devices Fire Suppression System

Guta email Guta

Language

Language

Smoke Detector Faulty and Solutions