Cabinet Type FM200 Gas Suppression System

Update time : 2023-06-08 09:04:30

Cabinet type FM200 gas suppression system is a portable fire-fighting equipment with automatic fire detection, alarm and fire extinguishing. Its performance is excellent, and its control part can be connected with the fire control center.

The gas extinguishing agent storage cylinder of cabinet type FM200 gas suppression system is packaged into a fire extinguishing cabinet, which is usually placed in a protection area. When there is a fire, the gas suppression system doesn’t need to go through many pipelines, and it can be directly sprayed in the protection area.

What Consists in System

Cabinet type FM200 gas suppression system includes storage cylinders, starting devices, main relief valves, pressure gauges, cabinets, pressure signal devices, short spray pipes, nozzles, and FM200 fire extinguishing agents.

Applications

Cabinet type FM200 gas suppression system is suitable for data centers, libraries, archives, valuables warehouses, power stations (transformer rooms), telecommunications centers, clean workshops and other important places.

Advantages and Disadvantages of Manifold Type and Cabinet Type FM200 Gas Suppression System

1.Manifold type system sprays the agent through the pipe network, and the nozzles are evenly distributed, so the spraying is even and the fire extinguishing effect is good, while the cabinet type system network generally sprays directly from the cabinet nozzles, and the spraying is not even enough.

2.Manifold type FM200 gas suppression system should have a separate cylinder room and pipe network, while cabinet type system doesn’t need pipe network. If there is only one area that needs to be protected, the cost of the manifold type system will be higher economically.

3.If there are many protection areas, the manifold type system can use the same system to protect different areas, targeted spraying. and the cabinet type system requires separate cylinders and fire extinguishing agents for each protection area. Under this circumstance, the price of the cabinet type system is relatively high.

4.The cylinders of manifold type system are in cylinder room. Because of the long distance, high pressure is required, generally is 4.2MPa.

5.The cylinders of cabinet type system are in protection area. The pressure should not be too high, generally is 2.5MPa.

Guta provides cabinet type FM200 gas suppression system for customers, spraying the extinguishing gas to the protection area quickly to protect the safety of people and assets.

Previous : What is Fire Hose?

Next : Manifold Type FM200 Gas Suppression System

What is Fire Hose?

Oct .13.2023

A fire hose is a highly pressurized hose that is used to bring water to the fire. It may also transport flame retardants. Fire hoses can be attached to either a fire engine or a fire hydrant, and the pressure is between 800 and 2000 kPa. For reasons of fire safety, it's quite important to have a fire hose inspection as well as all fire protection equipment tested. If, during a fire emergency, the fire hose fails it could have disastrous results.

Addressable Explosion-proof Fire Alarm System Introduction

Aug .08.2023

The Explosion Proof range of products has been designed to provide protection against explosions and products to ensure that all major advantages of high-quality fire detection technology can be safely exploited in industrial and hazardous environments. Many difficult sites such as metal, paint, pipelines, chemical, pharmaceutical, oil refineries, and other installations are vulnerable to the risk of explosion. In order to protect the assets and people, they need special solutions for fast and reliable fire detection.

Emergency Lighting System Installation Guide

Jul .20.2023

Emergency lighting system is divided into centralized controlling and non-centralized controlling type, or centralized power supply and non-centralized power supply type. This article talks about emergency lighting system, power supply, emergency light controller installation guide.

Fire Alarm System Device Inspection and Maintenance

Jul .05.2023

Installing fire protection facilities and carry out regular maintenance are significant. This article talks about the inspection and maintenance of linear beam smoke detector, aspirating smoke detector, flame detector, manual call point, and strobe sounder.

China-R&D and Supply Chain Center

Huoju District, Zhongshan City, Guangdong Province, China

Email us

[email protected]

Call us

0086 13922805301

About Us: About Us

Products: Fire Alarm System Emergency system Fire Suppression System Fire Fighting System

Contact Us

News: Company News Industry News Fire Alarm Devices Fire Alarm System Fire Detection Devices Fire Suppression System

Guta email Guta

Language

Language

Cabinet Type FM200 Gas Suppression System